-
D290 Macroporous Strong-Base Anion Exchange Resin
For Efficient Demineralibation Including vanadium Removal
D290 is a high capacity, shock resistant, macroporous,Type I ,strongly basic anion exchange resin supplied in the chloride or hydroxide form as moist, tough, uniform, spherical beads.
D290 has a high operating capacity, especially on high-FMA feedwaters, as well as a high reversible sorptive capacity for complex organic materials, such as the fulvic and humic acids which occur in many surface water supplies.
It is recommended for use in waters with low silica loads. For high silica waters, a type 1 anion resin such as Pure D290 is recommended.
-
D301G Weak-Base Anion Exchange Resin
D301G is a very high capacity, bead form, weak base, macroporous type, anion resin . It is a spherical bead form resin(unlike other granular formulations) suitable for use in high flowrate applications. The exceptionally high operating capacity and regeneration efficiency of D301G make it ideal for applications where the maximum possible throughput and minimum chemical dose are required.
-
DL918 Macroporous Adsorbent Resin
For alkaloid extraction, organic extraction and separation of cephalosporins, Ivermectin, clindamycin phosphate has good adsorption.
-
DL510 Strong-Base Acrylic Anion Exchange Resin
DL510 is a high capacity, organic fouling resistant, macroporous ,acrylic Type I. Strongly basic anion resin. Supplied in the chloride or hydroxide form as moist, tough, uniform spherical beads.
DL510 is intended for use in all types of deionization systems and chemical process applications. Where water temperature do not exceed 40C.
-
DL501 Strong-Base Type I (Gel) Acrylic Anion Exchange Resin
DL501 is a high capacity, organic fouling resistant, gel acrylic Type I. Strongly basic anion resin. Supplied in the chloride or hydroxide form as moist, tough, uniform spherical beads.
DL501 is intended for use in all types of deionization systems and chemical process applications.
-
GA211 Strong-Base Type II (Gel) Anion Exchange Resin
GA211 is a high capacity, gelular, Type II strongly basic anion exchange resin supplied in the chloride form as moist, tough, uniform particle size. It provides superior regeneration efficiency and greater resistance to organic fouling than Type I strongly basic anion exchange resins.
GA211 is intended for use in all types of dealkalization, deionization and chemical processing applications
-
PFAS SELECTIVE RESIN DL-PFA618E
DL-PFA618E is a specially developed ionexchange resin with high selectivity for poly- andperfluoroalkyl substances (PFAS) such as PFOA andPFOS. The resin effectively removes contaminationand makes public drinking water cleaner and safer. -
PA510 Strong-Base Acrylic Anion Exchange Resin
PA510 Strong-Base Acrylic Anion Exchange Resin
PA510 is a high capacity, organic fouling resistant, macroporous ,acrylic Type I. Strongly basic anion resin. Supplied in the chloride or hydroxide form as moist, tough, uniform spherical beads. PA510 is intended for use in all types of deionization systems and chemical process applications. Especially for the decolorization of liquid sugar syrups.
-
DL408 Arsenic Selectivity Resin
REMOVING ARSENIC FROM POTABLE WATER SYSTEMS
Arsenic is a toxic substance with varying degrees of regulation. The standard MCL (maximum concentration level) for arsenic in drinking water for the USA is 10 ppb. -
Macroporous chelation resin
Dongli’s wide range of chelating resins contain special functional groups that gives these resins superior selectivity for specific target metals. Chelation resins are found in a wide range of metals removal and recovery applications, from the primary recovery of precious metals as well as the removal of impurities that may be present as mere traces.
DL401, DL402, DL403, DL405, DL406, DL407, DL408, DL410
-
Weak base anion exchange resin
Weak Base Anion(WBA) resins are polymer made by polymerizing styrene or acrylic acid and divinylbenzene and chlorination,amination . Dongli company can provide gel and macroporous types WBA resins with different crosslink. Our WBA are available in many gradings including Cl forms, uniform size and food grade.
GA313, MA301, MA301G, MA313
Weakly basic anion exchange resin: this kind of resin contains weakly basic groups, such as primary amino group (also known as primary amino group) – NH2, secondary amino group (secondary amino group) – NHR, or tertiary amino group (tertiary amino group) – NR2. They can dissociate Oh – in water and are weakly basic. In most cases, the resin adsorbs the whole other acid molecules in the solution. It can only work under neutral or acidic conditions (such as pH 1-9). It can be regenerated with Na2CO3 and NH4OH.
-
Strong base anion exchange resin
Strong Base Anion(SBA) resins are polymer made by polymerizing styrene or acrylic acid and divinylbenzene and chlorination,amination .
Dongli company can provide gel and macroporous types SBA resins with different crosslink. Our SBA are available in many gradings including OH forms, uniform size and food grade.
GA102,GA104,G105,GA107,GA202,GA213,MA201,MA202,MA213,DL610
